Carbon 5D roll film black 1.52x18m

FILM ROLL CARBON 5D BLACK 1,52X18M

NOTE: Buying this product you will receive one roll of 1,52x18m.

Do you feel like personalizing the interior of your car? Or maybe not only the interior?
And not only the car?

Do you have a scratched windowsill or a dinged piece of furniture?

We have the solution to your problems.

Our CARBON 5D BLACK thermoplastic veneer film is a decorative product. It will allow you to give your objects freshness – awaken them to life! It will perfectly help you stand out from the crowd and break out of the accepted schemes. Our veneer film is an ideal material for inexpensive masking of damage and other imperfections.

CARBON film is an increasingly popular material used for visual tuning of cars. It is used both inside cars and on the outside. It looks like real carbon fiber – a durable material with low weight. It will give the car an indestructible image while maintaining its lightness.

CARBON veneer film will also be great for wrapping: motorcycles, laptops, phones, tablets… or bicycles and scooters. In fact, only your imagination limits the use of the film.

1. properties of the film:

• 
  

  self-adhesive – the film has a specialized channel adhesive, which makes it easy to stick and minimizes the risk of air bubbles; the film is easy to install especially on flat, even surfaces



• 
  

  easy to correct – you may be thinking, “What if I stick the film wrong?” Rest assured that even within a dozen minutes after the first fixation you are able to get the full strength of the film. At the initial stage, the adhesive still weakly “binds”, which will make it easier for you to correct the mistake



• 
  

  trouble-free to remove – you can easily remove the film with warm air; it does not leave traces of glue



• 
  

  flexible and thermoplastic – you can adjust the film to a wide variety of shapes, you just need to use heat, which will increase its plasticity



• 
  

  convenient for portioning – the film on its inner side has evenly spaced lines, which will make it easier for you to cut it to the right size



• 
  

  resistant to abrasion, detergents and even oil and grease



• 
  

  easy to clean – just wipe with a damp cloth



• 
  

  has a structure that looks like real carbon fiber.

2 Installation instructions

Tools useful for film installation: surface degreaser, scissors, hair dryer and squeegee. (no items included)

NOTE: If you want to use a heat gun, remember to keep the proper distance. The same is true for a hair dryer. Too high a temperature can unstick the veneer.

1. 
   

   Preparation of the foil – the foil on its inner side has evenly spaced lines. Based on these, cut the appropriate piece with scissors. NOTE: it would be worthwhile for you to include 2-3 cm each for wrapping the foil under the wrapped element.



2. 
   

   Preparation of the surface – the area where the film will be placed well degrease and wipe.It must be clean and dry.



3. 
   

   Installation of the film – stick the film gradually peeling off the protective paper. For flat surfaces, press down using a squeegee. However, when you encounter rounded shapes, unevenness heat the film with the help of, for example, a hair dryer. The film will become malleable and, with a little patience and precision, will allow it to conform to the surface to be taped.



4. 
   

   Elimination of bubbles – channel adhesive minimizes the risk of air bubbles. However, if they appear, smooth the film from the inside out – you can do this with a squeegee.



5. 
   

   After installation, the film does not require heat fixation.

3 Use of the film

The film is primarily recommended for use inside. It can also be used outdoors.

The most common uses of the film:

• 
  

  visual tuning of the car



• 
  

  refreshing the appearance of a laptop, windowsill, phone, bicycle



• 
  

  masking of damage caused and other imperfections

Note: There are places, objects to which it is not worth sticking the film:

do not stick to moving parts – such as door hinges – because the film may break off

do not stick to places that heat up – such as exhaust pipes, lamps, oven doors – because the film may burn

4 Specification

• 
  

  Foil type – CARBON



• 
  

  Color: Black



• 
  

  Thickness – 230 microns



• 
  

  Roll dimensions – 1, 52x18m



• 
  

  Channel adhesive: yes



• 
  

  External: yes



• 
  

  Thermoplastic: yes



• 
  

  Waterproof: yes



• 
  

  Application temperature – from -40°C to +80°C

NOTE: When you buy this product, you will receive one roll of 1.52x18m.